These spare parts are designed specifically to self service and maintain your 3in MAXSwerve Module (REV-21-3005). Created for efficient repairs and upkeep, routinely servicing your 3in MAXSwerve Module with spare parts will enhance performance and...

The 3in MAXSwerve Aluminum Wheel was designed for the 3in MAXSwerve Module. You can attach your favorite tread material to this wheel. REV recommends rough top conveyor belting. A cut template for the wheel tread is available below...

This product is a Driver Hub Repair Service, NOT a way to purchase a Driver Hub. We strongly recommend reviewing the Driver Hub Repair portion of our Warranty and Returns page, and contacting support@revrobotics.com before purchasing this item. In...

These JST PH 6-pin Extension Cables are intended to extend the reach of sensor cables without having to cut and splice wires. Specifications Length: 30cm Notes As of 01/10/2024, the length on this product page has been corrected from 15cm to 30cm...

This bundle contains the motors and motor controllers needed to run one 3in MAXSwerve Module.  Kit Contents  SKU   PRODUCT NAME   QUANTITY   REV-11-2158   SPARK MAX Motor...

Connect the REV Through Bore Encoder directly to the SPARK MAX Data Port using this adapter. This adapter connects the Absolute Duty Cycle output of the Through Bore Encoder to the correct SPARK MAX Data Port pins, leaving the incremental quadrature...

3/16in Rivets are compatible with the REV ION System are perfect for a variety of applications where a strong, permanent joint is required. Place the rivet into a hole from a single side (a “blind” hole) and then use a rivet...

Tube Nuts for 3/4in Dead Axle Tube are compatible with the REV ION System. This #10-32 tube nut presses into the end of the tube and supplies a tapped hole for easy mounting. Typically used with dead axle applications. The left-hand threaded...

The #25 Chain Turnbuckle is compatible with both the REV ION System and REV DUO System. It is designed to adjust the length of a #25 Chain by replacing a few links in a run and also allows the user to tension the chain by adjusting...

The Rounded UltraHex Shaft is compatible with the REV ION System and allows teams to adapt the REV 5mm Hex Shaft family of products to 0.5in Hex applications. It can also be used as a coupler to extend 5mm Hex shafts. Rounded UltraHex...

Designed for use with the REV ION System and with an efficient right-angle configuration, the MAX 90 Degree Gearbox offers a robust and high-performance solution to building a more compact robot. Connect the MAX 90 Degree Gearbox to the MAXPlanetary...

The 3in MAXSwerve Module Wheel Hardware Pack was designed for the 3in MAXSwerve Module. This kit is for FRC teams looking to streamline their wheel maintenance at competitions. With this kit, teams can pre-build their wheel assemblies, making...

#10-32 Ball Joint Rod Ends are compatible with the REV ION System. Right-hand threaded rod ends tighten when turned clockwise while left-handed threaded rod ends tighten when turned counterclockwise.  Specifications Type: Stud-type Rod...

This product is a pack of 12 Tooth pinion gears for the 2 Motor Drivetrain Gearbox - Through Bore. Purchasing a Base Kit, Gear Ratio, and Speed Option are all required to assemble a full gearbox, visit the 2 Motor Drivetrain Gearbox - Through...

This product is a pack of 11 Tooth pinion gears for the 2 Motor Drivetrain Gearbox - Through Bore. Purchasing a Base Kit, Gear Ratio, and Speed Option are all required to assemble a full gearbox, visit the 2 Motor Drivetrain Gearbox - Through...

This product is a pack of 10 Tooth pinion gears for the 2 Motor Drivetrain Gearbox - Through Bore. Purchasing a Base Kit, Gear Ratio, and Speed Option are all required to assemble a full gearbox, visit the 2 Motor Drivetrain Gearbox - Through...

This product is a 6in Wheel Gear Ratio for the 2 Motor Drivetrain Gearbox - Through Bore. Purchasing a Base Kit, Gear Ratio, and Speed Option are all required to assemble a full gearbox, visit the 2 Motor Drivetrain Gearbox - Through Bore...

This product is a 5in Wheel Gear Ratio for the 2 Motor Drivetrain Gearbox - Through Bore. Purchasing a Base Kit, Gear Ratio, and Speed Option are all required to assemble a full gearbox, visit the 2 Motor Drivetrain Gearbox - Through Bore...

This product is a 4in Wheel Gear Ratio for the 2 Motor Drivetrain Gearbox - Through Bore. Purchasing a Base Kit, Gear Ratio, and Speed Option are all required to assemble a full gearbox, visit the 2 Motor Drivetrain Gearbox - Through Bore...

New and improved, the Mecanum Drivetrain Kit V2 gives teams all the parts needed to build a Mecanum Drivetrain for use within robotics programs like FTC. This updated kit uses Ultra 90 Degree Gearboxes to place the UltraPlanetary HD Hex Motors within the...