null

Competition

Sort By:

Display Type:
Filters
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Punch Tube - 1m

    Punch Tube - 1m

    REV-41-1453
    $11.50
    The REV Punch Tube is designed to enable teams to rapidly prototype ideas and build robots without some of the constraints generally associated with extrusion based construction. When paired with our Metric Step Drill (REV-49-1455) and 1/8in or 3.2mm...
    Qty in Cart: 0
    Quantity:
    Price:
    $11.50
    Subtotal:
  • POE Injector Cable

    POE Injector Cable

    REV-11-1210
    $11.50
    The REV POE Injector Cable was specifically designed to address a common problem for many FRC teams with their wireless radios: intermittent power glitches. The wireless radios used in the last several FRC seasons can be powered either through a...
    Qty in Cart: 0
    Quantity:
    Price:
    $11.50
    Subtotal:
  • Blinkin LED Driver

    Blinkin LED Driver

    REV-11-1105
    $46.00
    Blinkin makes adding LEDs to your robot as simple as driving a motor. Chose the pattern you want and give it the corresponding PWM signal. The REV Blinkin LED Driver is a compact LED driver module that simplifies controlling both 12V RGB LED and 5V...
    Qty in Cart: 0
    Quantity:
    Price:
    $46.00
    Subtotal:
  • 20:1 Hex Gearbox & Pinion

    20:1 Hex Gearbox & Pinion

    REV-41-1064
    $17.00
    This gearbox is the same one used on our HD Hex Motor 20:1 Spur Gearbox featuring our 5mm HEX output shaft! This gearbox can be installed on any 550 series motors (like the NeveRest motors from AndyMark) giving you the convenience and...
    Qty in Cart: 0
    Quantity:
    Price:
    $17.00
    Subtotal:
  • 15mm Extrusion - 150mm - 45° Ends - 2 Pack

    15mm Extrusion - 150mm - 45° Ends - 2 Pack

    REV-41-1430-PK2
    $7.00
    For smaller applications the DUO Build System also comes in a 15mm x 15mm square extrusion. The 15mm profile of the 15mm Extrusion has slots on on all four sides that accept standard M3 hardware. Rather than using a T-nut, which is more expensive, slide...
    Qty in Cart: 0
    Quantity:
    Price:
    $7.00
    Subtotal:
  • 15mm Extrusion - 225mm - 90° Ends - 2 Pack

    15mm Extrusion - 225mm - 90° Ends - 2 Pack

    REV-41-1431-PK2
    $8.50
    For smaller applications the DUO Build System also comes in a 15mm x 15mm square extrusion. The 15mm profile of the 15mm Extrusion has slots on on all four sides that accept standard M3 hardware. Rather than using a T-nut, which is more expensive, slide...
    Qty in Cart: 0
    Quantity:
    Price:
    $8.50
    Subtotal:
  • 15mm Extrusion - 420mm - 90° Ends - 4 Pack

    15mm Extrusion - 420mm - 90° Ends - 4 Pack

    REV-41-1432-PK4
    $25.00
    For smaller applications the DUO Build System also comes in a 15mm x 15mm square extrusion. The 15mm profile of the 15mm Extrusion has slots on on all four sides that accept standard M3 hardware. Rather than using a T-nut, which is more expensive, slide...
    Qty in Cart: 0
    Quantity:
    Price:
    $25.00
    Subtotal:
  • Metric Step Drill

    Metric Step Drill

    REV-49-1455
    $9.00
    All the drills you need for FTC in one handy tool! Specifications Maximum material thickness: 3mm Tool material: High-Speed Steel Shank: 0.25in Hex 10 unique diameters 3, 4, 5, 6, 7, 8, 9, 10, 11, & 12 mm Hole Size Compatibility 3mm Clearance...
    Qty in Cart: 0
    Quantity:
    Price:
    $9.00
    Subtotal:
  • JST VH 2-pin Joiner Board - 4 Pack

    JST VH 2-pin Joiner Board - 4 Pack

    REV-31-1429-PK4
    $5.50
    These small connector boards can be used to join two JST VH 2-pin Motor Cables to create a longer cable. 
    Qty in Cart: 0
    Quantity:
    Price:
    $5.50
    Subtotal:
  • M3 Nut - 100 Pack

    M3 Nut - 100 Pack

    REV-41-1126-PK100
    $5.50
    Zinc plated steel nuts compatible with all REV DUO M3 screws or bolts. This is a plain nut which does NOT contains a nylon insert.  Specifications Thread Pitch: M3 x 0.5 Material: Corrosion resistant zinc plated steel Width: 5.5mm Height: 2...
    Qty in Cart: 0
    Quantity:
    Price:
    $5.50
    Subtotal:
  • XT30 Extension Cables

    XT30 Extension Cables

    $8.50 - $9.50
    The XT30 Extension Cable is keyed and locking for improved reliability. Use this cable along with an 3-pin JST PH Cable to connect a second REV Robotics Expansion Hub. Expansion Hub XT30 Connections: Power, One Male and One Female XT30 Connector ...
    Qty in Cart: 0
    Quantity:
    Price:
    $8.50 - $9.50
    Subtotal:
  • JST PH 4-pin Joiner Board - 4 Pack

    JST PH 4-pin Joiner Board - 4 Pack

    REV-31-1388-PK4
    $7.00
    These small connectors can be used to join two JST PH 4-pin Sensor Cables to create a longer cable. 
    Qty in Cart: 0
    Quantity:
    Price:
    $7.00
    Subtotal:
  • JST VH 2-pin Motor Cables

    JST VH 2-pin Motor Cables

    $9.00 - $20.50
    The 2-pin JST VH Cable is keyed and locking for improved reliability.  Expansion Hub 2-pin JST VH Connections: Motor Power Product Options  SKU   PRODUCT NAME   REV-31-1412-PK4   JST VH 2-pin Motor Cable -...
    Qty in Cart: 0
    Quantity:
    Price:
    $9.00 - $20.50
    Subtotal:
  • JST PH 4-pin Sensor Cables

    JST PH 4-pin Sensor Cables

    $7.00 - $13.50
    The 4-pin JST PH Cable is keyed and locking for improved reliability.  Expansion Hub 4-pin JST PH Connections: Motor Encoder Digital Analog I2C Product Options  SKU   PRODUCT NAME   REV-31-1407-PK4   JST PH...
    Qty in Cart: 0
    Quantity:
    Price:
    $7.00 - $13.50
    Subtotal:
  • Battery Charger

    Battery Charger

    REV-31-1299
    $36.50
    Charger for use with our 12V Slim Battery. The output is wired with an XT30 male connector for charging. For the input, the battery charger has an IEC C13 power cord to standard, grounded, North America wall outlet plug (NEMA 5-15). *Do not...
    Qty in Cart: 0
    Quantity:
    Price:
    $36.50
    Subtotal:
  • Switch Cable and Bracket

    Switch Cable and Bracket

    REV-31-1387
    $12.00
    Add this switch between your battery and Expansion Hub to have convenient on/off control of your robot. We recommend mounting the switch slightly recessed from the outside of your robot so that it's not accidentally turned off by another robot during a...
    Qty in Cart: 0
    Quantity:
    Price:
    $12.00
    Subtotal:
  • Anderson to JST VH Cable - 12 cm - 4 pack

    Anderson to JST VH Cable - 12 cm - 4 pack

    REV-31-1381-PK4
    $23.00
    Use the Anderson Power Pole to 2-pin JST VH Adapter Cable to connect your existing motors to the REV Robotics Expansion Hub. Teams that already own and use the Anderson Powerpole Crimper may purchase JST VH 2-pin Motor Cables (REV-31-1413), cut cables in...
    Qty in Cart: 0
    Quantity:
    Price:
    $23.00
    Subtotal:
  • Sensor Splitter Cable - 2 Pack

    Sensor Splitter Cable - 2 Pack

    REV-31-1386-PK2
    $5.50
    The analog and digital ports on the Control Hub and Expansion Hub combine two sensor inputs into one connector to save space. Single sensors plugged directly into these ports will work, but they will block access to the second input. The Sensor Splitter...
    Qty in Cart: 0
    Quantity:
    Price:
    $5.50
    Subtotal:
  • XT30 Connectors - 5 pairs

    XT30 Connectors - 5 pairs

    REV-31-1399-PK5
    $11.50
    Use these connectors to create your own custom length power wires. The XT30 Connector uses a solder cup instead of a crimping tool to connect the contact to a wire. 
    Qty in Cart: 0
    Quantity:
    Price:
    $11.50
    Subtotal:
  • Sensor Cable Adapter for Level Converter

    Sensor Cable Adapter for Level Converter

    REV-31-1384
    $1.75
    Cross over cable to convert the pin out from Modern Robotic's I2C sensors to work with the REV Robotics's Logic Level Converter. 
    Qty in Cart: 0
    Quantity:
    Price:
    $1.75
    Subtotal:
  • Total: items /

Adding your products to cart